News
Ductile iron, also known as nodular or spheroidal graphite iron, exhibits a density that typically ranges between 7.05 and 7.30 g/cm³ (7.05–7.30 Mg/m³), varying with grade, composition, and processing...
Cast iron and ductile iron are both iron–carbon alloys but differ significantly in their microstructures, mechanical properties, and industrial uses. Cast iron contains flake graphite, which gives it excellent...
All metals can be classified into ferrous and non-ferrous categories based on their iron content. Ferrous metals contain significant amounts of iron, giving them magnetic properties and high tensile strength,...
Ductile iron, also known as nodular or spheroidal graphite iron, is inherently magnetic due to its high iron content and ferromagnetic matrix structure. Its magnetic behavior—characterized by relative...
Cast iron and ductile iron are both cast iron alloys but possess distinct microstructures—graphite flakes in cast iron versus spheroidal nodules in ductile iron—which result in markedly different mechanical...
How to repair ductile iron pipe? joint re-tightening and gasket replacement for socket leaks; cement-mortar lining restoration according to AWWA C104 guidelines; mechanical repair sleeves or clamp fittings...
Class K9 thickness for ductile iron pipes—one of the most common wall-thickness classifications under ISO 2531.Nominal diameter: 80 mm→1200 mm, they are available in nominal thickness between 6mm to 15.3mm....
Ductile iron pipe costs vary significantly depending on diameter, class, lining, and joint type, typically ranging from $22.71 to $342.26 per foot (≈$74–$1,121/m) for small to large diameters. Global prices...
When selecting piping materials for infrastructure, industrial, or construction applications, ductile iron and steel pipes are two widely used options, each offering distinct advantages. Ductile iron,...
In plumbing and HVAC systems, copper tubing is classified by wall thickness into Types K, L, M, and DWV, with Types K and L being the most prevalent for water distribution. Type K—recognized by its green...
Before diving into specifics, it’s essential to know that the “K” in ductile iron pipe stands for a thickness‐class coefficient defined by ISO 2531/EN 545, used in the formula e=K×(0.5+0.001×DN)e = K \times...
A ductile iron pipe’s “K” designation refers to a thickness class coefficient defined by international standards (ISO 2531/EN 545 and IS 8329), used to calculate the wall thickness needed for given diameters...